SENKEN Brand-New Anti-cut Gloves FGST-SK01

Parameters:

1. Appearance: The surface of the gloves is smooth and flat, without defects such as loose ends, damage, notches, loose threads, missed stitches and stains

2. Color: White/ black

3. Material: It is woven with ultra-high molecular weight polyethylene fiber wrapped with stainless steel wire as the outer layer and polyester low-elastic filament as the inner layer

4. Structure: Finger-separated gloves, with the wrist, palm, back of the hand and fingers all within the anti-cut coverage range, and the material is consistent

5. Anti-cutting performance: Use a dedicated glove cutting testing machine, set the blade pressure at 20N and the blade speed at 20r/min, and perform 5 cuts on the palm or back of the anti-cutting gloves in a direction perpendicular to the fingers. Each time a cut occurs, the number of cutting cycles should be greater than 6, and the cutting resistance coefficient should not be less than 2.52

6. Performance requirements: It should have properties such as resistance to bending, fatigue, cutting, and non-toxicity. The product is easy to put on and take off, breathable, has a good touch and hand feel, and does not affect joint bending

7. Execution Standard: "GA 614-2006 Police Cut-Resistant Gloves"